NXP Semiconductors S32K312EVB-Q172 - Page 7

NXP Semiconductors
S32K312EVB-Q172 HWUM
S32K312EVB-Q172 | S32K312EVBQ172ND - Hardware User Manual
S32K312EVB-Q172
S32K312EVBQ172ND
HWUM
All Information provided in this document is subject to legal disclaimers
© NXP B.V. 2020. All rights reserved
NXP Semiconductors
REV A1 – 01/2022
Page 7 of 25
a)
- The power switch -SW1 must be in OFF position before to the EVB be connected to an external power supply.
b)
- Once the power switch -SW1 is in OFF position, then the EVB can be connected to an external power supply.
c)
- Now the power switch -SW11 can be changed to ON- position.