Nytech DC-7200 - L Anguage; Time

Nytech DC-7200 Introduction
18 - English
Setting the Menu Language
1. Power the Nytech DC-7200 on by pressing and holding the Power
button [1] for approx. 1 second.
2. Press the Menu button [6] to display the Settings menu.
3. Press e or f on the four-way button to select Setup (icon
) and
then press the Set button [8] to open the Setup menu.
4. Press c or d on the four-way button to select Language (icon
)
and then press the Set button [8].
5. Press c or d on the four-way button to move the highlighted bar
through the different languages and select the desired language by
pressing the Set button [8].
6. Press the Menu button [6] to exit the Setup menu.
Setting Date and Time
1. Power the Nytech DC-7200 on by pressing and holding the Power
button [1] for approx. 1 second.
2. Press the Menu button [6] to display the Settings menu.
3. Press e or f on the four-way button to select Setup (icon
) and
then press the Set button [8] to open the Setup menu.
4. Press c or d on the four-way button to select Date & Time
(icon
) and then press the Set button [8].
5. Press e or f on the four-way button to move the highlighted bar
through the different options and change the entries by pressing the
four-way button (c or d).
6. Press the Set button [8] to save the selected settings.
7. Press the Menu button [6] to exit the Setup menu.