Nytech DC-7200 Advanced Settings
54 - English
Power-Saving Function
When the Nytech DC-7200 is left powered on but not used, it will power off
the LCD [12] automatically after the preset time (the status indicator [2] will
blink green). Press any button to re-activate the LCD display.
If the camera is left unused another minute after the display has powered
off, the camera will switch off completely.
Select a power-off time between 1 minute, 3 minutes or 5 minutes.
Date & Time
You have already read about this feature in the Getting Started chapter.
Please read page 18 – Setting Date and Time.
Language
You have already read about this feature in the Getting Started chapter.
Please read page 18 – Setting the Menu Language.
File Number
Your Nytech DC-7200 will automatically assign a unique name to your
recordings. This file name is a combination of the prefix “DSCI” followed by
a sequential four-digit number (starting at 0001).
You can select the Reset function from this menu to reset the sequential
number back to 0001. To avoid double names, your Nytech DC-7200 will
automatically create a new folder on the memory card.
TV Out
This menu allows you to select the TV standard of your television set. The
standards PAL and NTSC are available. In Europe, PAL is generally the
standard whereas NTSC is the standard on the American continent and in
Asia.
To Next Page
Loading...
