Nytech DC-7200 - Playing Back Images and Video Clips; Quick Guide

Nytech DC-7200 Playing Back Images and Video Clips
English - 39
Playing Back Images and Video Clips
Quick Guide
You can use the display [12] of your Nytech DC-7200 to view captured
pictures and videos.
1. Power the Nytech DC-7200 on in Playback mode by pressing and
holding the Play button [5] for approx. 2 seconds. The last recorded
picture will appear on the display [12] (if the memory is empty, the
message No image will appear).
2. Press e or f on the four-way button [9] to scroll along the recorded
photos, video clips or voice recordings.
i
Keep the buttons e or f pressed for fast scrolling.
3. If the file is a video clip or a voice recording, or if the picture
contains a voice note, the icon [c : Play] will appear. Press c on
the four-way button [9] to play the recording.
During playback, you can use the four-way button c [9] for the
following:
- c Pauses playback.
- d Stops playback
- f Fast forward playback (only for video clips)
Press c to return to playback mode.
- e Fast backward playback (only for video clips)
Press c to return to playback mode.
i
During video clip playback you can freeze the image and capture
it as a photo. To do so, press c on the four-way button [9] to
pause the playback at the desired frame. The message
SH1: Capture will appear on the LCD. Next press the shutter
button [3]. The picture will be captured and displayed in playback
mode.