Nytech DC-7200 Audio Recording and Playback
English - 51
Audio Playback
You can use the Playback mode to listen to your audio recordings.
1. Power the Nytech DC-7200 on in Playback mode by pressing and
holding the Play button [5] for approx. 2 seconds.
2. Press e or f on the four-way button [9] to scroll along the recorded
photos, video clips or voice recordings.
i
Keep the buttons e or f pressed for fast scrolling.
3. If the file is a voice recording (or if the picture contains a voice
note), the icon [c : Play] will appear. Press c on the four-way
button [9] to play the recording.
During playback, you can use the four-way button [9] for the
following:
- c Pauses playback.
(Pressing the button c again resumes playback).
- d Stops playback
To Next Page
Loading...
