Nytech DC-7200 - Appendix; Power Indicator Status

Nytech DC-7200 Appendix
62 - English
Appendix
Power Indicator Status
The power indicator [7] of your Nytech DC-7200 informs you of the camera
status. Depending on its colour and/or blinking frequency it has the
following meanings:
Steady green, display on:
The camera is ready in Record mode.
or
The autofocus was able to focus the subject. The settings for aperture
and shutter speed will prevail as long as the shutter button is kept
pressed down. The flash does not fire.
Steady green, display off:
The camera has been connected to the TV set via the AV cable or it has
been connected to a computer via the USB cable.
Blinking green, display on:
The camera is set to video or voice recording mode or the burst
photography mode has been enabled.
or
The autofocus was unable to focus the image (change the camera
position or the zoom factor and retry the autofocus again).
or
The rechargeable battery is exhausted. The device powers off.
Blinking green, display off:
The camera is in power-saving mode (press any button to exit the
power-saving mode).