Nytech DC-7200 - Page 72

Nytech DC-7200 Appendix
66 - English
Troubleshooting (continued)
Problem Reason Solution
The picture is distorted
or blurred.
The camera has
moved during capture.
Hold the camera still.
The subject was
located outside the
focus range of the
camera.
Change your relative
position to the
subject. Use the
Macro mode when
capturing very close
subjects.
Recorded images
haven’t been saved.
The camera has been
powered off before
any picture could be
saved.
Don’t power the
camera off before the
power indicator lights
steady green.