38 Chapter 2 Installation and use of Onyx CADPro or Onyx GraphicsPro (Optional)
The use of Onyx GraphicsPro
[64]
3. Use Onyx GraphicsPro and Print over the network to a "Hot folder"
1. The shared Input folder on the PC (with the GraphicsPro installation) is used to print
over the network.
Note: Only a limited amount of known users (a Windows related issue) can
simultaneous access this shared folder. For details contact your local IT
administator.
[65]
2. Activate "Start" -> "Run".
Fill in the network name of the PC (with the GraphicsPro installation): Example
pc1-wvg
Click on "OK".
[66]
3. Double-click on the "Input" folder.
To Next Page
Loading...
Need help?
General
