222 User manual
Settings for extended scan-to-file jobs
Available settings for scan-to-file jobs
The scan-to-file settings
Setting Description
'Destination' Use this setting to define the default destination for
scan-to-file jobs on the controller. You can define
a maximum of 10 remote destinations and one of
these destinations is the default destination.
'File type' Depending on the colour mode and file type you
select the values for the compression mode and
organisation will change. For some File types, the
Compression and Organisation settings cannot be
set in all situations.(see ‘'File type'’ on page 224)
'Resolution' Use this setting to define the resolution of the
scanned images. The higher the resolution you
select, the finer the image quality but the larger the
file size. (see ‘'Resolution'’ on page 225)
'Original type' Use this setting to define the type of original for
your scan-to-file jobs. The defined type influences
the quality of the output.(see ‘'Original type' and
background compensation’ on page 226)
'Original width' Use this setting to define the width of the original
that the scanner scans.(see ‘'Original width'’ on
page 227)
To Next Page