Oce TDS400-CS - Define the Media Series of the Océ TDS400 Printer

Maintain the Océ TDS400-CS 261
Define the media series of the Océ TDS400 printer
Introduction
You need to define which media series to use.
Before you begin
Use the key, the key and the 'previous' key to navigate. Use the
'next/select' key to select a menu or a value.
How to define the media series of the Océ TDS400 printer
1.
Press the 'on-line' key to turn the printer off-line.
2. Navigate to 'Configuration' and select this menu.
3. Navigate to 'Paper series' and select this menu.
4. Navigate to the required media series and select this value.
5. Press the 'on-line' key to turn the printer on-line.
Result
The required media series is defined.