Oce TDS400-CS - Define the Folded Package Width

Finish copy and print jobs 239
Define the folded package width
Before you begin
Use the key, the key and the 'previous' key to navigate. Use the
'next/select' key to select a menu or a value.
How to define the folded package width
1.
Press the 'on-line' key to turn the printer off-line.
2. Navigate to'Folding' and select this menu.
3. Navigate to 'Package' and select this menu.
4. Navigate to 'Width' and select this menu.
5. Enter a range between 186 - 230 mm in steps of 1 mm; Default value is 210
mm.
6. Press the 'on-line' key to turn the printer on-line.