46 User manual
The toolbar
Click the buttons on the toolbar of the Océ System Control Panel to check the
status of the items in the view area. If operator action is required, the
appropriate button will flash.
[10] The buttons of the toolbar
[10] The buttons of the toolbar
Item Function
'Printer' View the status of the printer. If the printer operator panel
displays an error, the 'Printer' status window of the Océ System
Control Panel will display the same error.
'Media' View the status of the media (available, empty or disabled).
The 'Media' display also shows information about the available
media sizes and media types.
Note: When a roll is disabled, the roll icon is greyed out. The
text '-disabled-' replaces the media information.
'Controller' View the status of the controller.
'Memory' Check the amount of set memory that is available. The
percentage on the right-hand side of the set memory meter
indicates the amount of set memory in use. The colours
indicate the following.
■ Green indicates that the set memory has sufficient space for
a large print job or many small jobs.
■ Orange indicates that the set memory approaches the red
zone. Large print jobs may not be possible.
■ Red indicates that the set memory is (nearly) full. The
system does not accept new print jobs. Remove files or wait
until files are printed and automatically removed from the
memory.
Note: Define the threshold values for the orange zone and the
red zone in the Océ Settings Editor.
To Next Page
Loading...
