11 Preparing Patients Data
Instruction Manual Myopia Master® (G/68100/EN Rev04 0820) 25 / 92
To correct an incorrect entry:
Press the [Delete Char] button to delete one character.
Press the [Delete Line] button to delete the whole entry in the field.
Alternatively, you can delete the entered text with the control wheel
by selecting the symbol "
".
After you have entered the full last name, press the [Enter] button.
Alternatively, you scroll up to the previous line or down to the next
line by activating the symbols "
" and "" accordingly.
Enter the patient’s first name and date of birth in the same manner.
After you have entered the date of birth, confirm by pressing [Enter].
You will now be asked whether you want to save the new patient
data.
Select the option "Yes".
The name of the patient appears in the list.
Press the [Measure] button to switch to measuring mode.
11.2.1 Selecting existing Patients
Select patients whose data have already been saved.
In the Patient Data Management menu, press the button [Patient].
Turn the control wheel to get to the desired entry in the list.
The following screen appears:
Press the [New Exam] button to switch to measuring mode.
Fig. 11-4: Select a patient
To Next Page
Loading...
