EN
34
ODYS PRIME
10 Input Source Selection
The unit incorporates multiple video modes which can be selected via the TV/AV / Source button
on the television or remote.
Press the SOURCE button to enter Input menu. The screen will display as shown below:
Input Source
DTV
ATV
SCART
YPBPR
PC
HDMI
Smart TV
AV
USB
and press the OK button to enter the selected mode.
DTV = Select DTV mode for digital antenna TV (DTT Services).
ATV = Select ATV mode for analogue cable TV.
SCART = Shows the picture of external device which connects to SCART
YPBPR = Shows the picture of external device which connects to YPBPR
PC = Shows the picture of external device which connects to VGA
HDMI = Shows the picture of external device which connects to HDMI
Smart TV = Enter Smart TV Functions on a android system like Internet, E-Mail, etc.
AV = Shows the picture of external device which connects to AV
USB = Open the media player for USB playback.
To Next Page
Loading...