Odys Prime - Page 51

EN
50
odottahWsnosaeRlaitnetoPmelborP
rewopehttcennoCdetcennoct'nsirewoPerutcipoN
Screen shows
No Signal
Incorrect setting Set up correct parameter
No or incorrect connection
with audio cable
Connect the audio cable
correctly
Mute the sound Switch on the correct
volume control
No sound from
Speaker
Incorrect sound track Try another sound track
Only sound,
no image on the
screen
No or incorrect connection
with AV cable
Connect the audio cable
correctly
The battery is exhausted Change new batteryRemote control
unit is not workable
Remote control unit is not
in the right opposite of the
front panel or too far from it
Adjust the way of holding
remote control unit and
near from the panel
The image stop
suddenly or mosaic
The signal is too weak Strengthen the signal
ODYS PRIME