3.0
4
3.2.1 DANGER SIGNS
Presence of voltage .
Presence of high temperature pieces .
Presence of risk of upper limbs crushing between hot plates.
3.2.2 GENERAL PROHIBITION SIGNS
Do not remove safety and protection devices.
Temporary protections removal - machine safety devices and protections
MUST NOT be removed unless for servicing needs and immediately using
measures to limit the resulting risk at a minimum, under the supervision of the
foremen.
The access to the operation area is forbidden to everybody except the operator.
Do not clean or lubricate with moving machine.
Do not use water to put out a fire.
3.2.3 GENERAL DUTIES
Cut off power supply before plugging or unplugging.
Make sure that protection and safety devices are efficient.
Report immediately defects and faults of the protection and safety devices and
any other risky situation you have learnt.
To Next Page
Loading...
