1
9.0
[1]
[2]
[3]
[4]
CHAPTER 9.0 PREPARING THE MACHINE
9.1 CLEANING
Carry out the cleaning of the machine following the instructions indicated in Chapter 11.0
“Maintenance”.
9.2 ADJUSTMENTS ANS CONTROLS
9.2.1 PROTECTIONS
Check the good conditions of the following
protections:
Side fixed protections [1]
Front interblocked movable hood [2]
Back fixed carter [3]
Upper fixed carter [4]
9.2.2 POWER SUPPLY CABLE
Check if the power supply cable is in good
conditions. It must not present wear, breaks,
cuttings, etc. Otherwise, it will be necessary to
have it replaced (see paragraph 8.6 “Electrical
Connection”).
To Next Page
Loading...
