OHAUS AP110 - Calibration Test; Exiting Calibration Menus

37
Cal TestCal Test
Cal TestCal Test
Cal Test
This feature checks the calibration against last stored calibration information. The Cal
Error display indicates the difference since the last automatic calibration.
1. Make sure there is no load on the pan and close the chamber doors.
2.
.
3.
4. .
5.
Cal EndCal End
Cal EndCal End
Cal End
To exit the calibration menus, proceed as follows:
1.
.
2. .
3. .
4.
.
5.
.
6.
.
MENUS