29
Trooper Scale
General Specifications
Platform Size (w x d) (in/cm) 13.5 X 9" / 34 X 23
Scale Dimensions (w x d x h) (in/cm) 13.5 X 14.5 X 4.5 / 34.3 X 36.8 X 11.4
Shipping Dimensions (w x d x h) (in/cm) 17 X 17 X 8.5 / 42.2 X 42.2 X 21.6
Weight (lb/kg) 8.6 / 3.9
Resolution NTEP 1:3000
Resolution Maximum 6,000 - 7,500 depending on model
Stabilization time 1 - 4 seconds depending upon filter selection
Keyboard 4 function membrane switches
Weighing units lb, kg, oz,g, oz
Display Backlit LCD, 25.4mm, 1"
Power AC Adapter or 6 alkaline C-type batteries
Typical Battery Life Up to 100 hours
Span Calibration 1/3 to full capacity
Linearity Calibration (3-point calibration) All models
Auto-zero tracking Off, 0.5, 1, or 3 divisions
Construction Stainless steel weighing pan, ABS plastic housing
Protection IP43
Operating Temperature 14°F to 113°F / -10°C to 40°C
Storage Temperature -40°F to 140°F / -20°C to 60°C
6.5 Technical Data (Cont.)
Standard Models TR3RS TR6RS TR15RS TR30RS
Default Capacity X Readability (lb)* 6lb X 0.001lb 15lb X 0.002lb 30lb X 0.005lb 60lb X 0.01lb
Default Capacity X Readability (kg)* 3kg X 0.0005kg 6kg X 0.001kg 15kg X 0.002kg 30kg X 0.005kg
Default Capacity X Readability (g) 3000g X 0.5g 6000g X 1g 15000g X 2g 30000g X 5g
NTEP Capacity X Readability (lb) 6lb X 0.002lb 15lb X 0.005lb 30lb X 0.01lb 60lb X 0.02lb
NTEP Capacity X Readability (kg) 3kg X 0.001kg 6kg X 0.002kg 15kg X 0.005kg 30kg X 0.01kg
NTEP Capacity X Readability (g) 3000g X 1g 6000g X 2g 15000g X 5g 30000g X 10g
Linearity (g) + 0.5g + 1.0g + 2.0g + 5.0g
Item Number TR3RS-2E0 TR6RS-2E0 TR15RS-2E0 TR30RS-2E0
NOTE: All Trooper models meet the requirements of Approval Agencies: UL, FCC, CSA, CE. NTEP approval.
* Default capacity and readability are dependant on calibration unit selected. The table above assumes that the
calibration unit is the same as the displayed unit listed. The full list of capacities and readabilities in the different
calibration units are listed below.
To Next Page
Loading...
