Ohmeda Biox 3700 - Maintenance; Cleaning and Sterilization

1118-301
MAINTENANCE
OXIMETER
WARNING
CLEANING AND STERILIZATION
ELECTRICAL SHOCK HAZARD: Always turn the
power OFF before cleaning the oximeter.
Do NOT autoclave or pressure sterilize this monitor. Do NOT soak or
immerse this monitor in any liquid. Do NOT Gas SterilizeThis monitor.
The outer surface of the oximeter can be cleaned with a soft cloth dampened
in a mild soap and water solution or isopropyl alcohol (70%). Ensure that
before wet* U°plugged prlor to cleaning and the unit is completely dry
Do not touch, press or rub the display panel with abrasive cleaning com
pounds, instruments, brushes, rough surface materials or make any contact
ciean'the d?fn?haC "V™"* the Pane1' ^ot use organic solvents to
clean the display panel. Use a cotton swab saturated with 70% isopropyl
alcohol and gently wipe the panel. isopropyl
CAUTION Never immerse this monitor in liquid.
CAUTION Do NOT autoclave this monitor.
CAUTION Do NOT gas sterilize this monitor.
- 83 -
01/27/86
/"^l