Oki 182 - Page 135

---------APPENDIX C INTERFACE CABLE
11 Busy 29 From
printer
A high signal in-
dicates that the
printer cannot
receive data. The
signal becomes high
in the
following
cases:
1. During data entry
2.
During printing
3.
In offline state
4.
During printer
error state
12
Paper
End 30
From
printer
A high signal in-
dicates that the
printer
is out of
paper.
13 Select
No
return
From
printer
This signal indicates
that the printer
is
ready to receive
data.
14
OV No
return
Logic ground
15
Not used
16
OV No
return
Logic ground
17 Frame Ground
No Printer's frame
return
ground.
In the
pri nter, the frame
ground and the
logic ground are
isolated from each
other.
117