I - 8
Section I - Hardware Installation
OKI OkiLAN 6020e User’s Guide
Note: If the red and green indicators do not display as
indicated above, see Hardware Troubleshooting at the
end of this section.
Printing a Configuration Sheet
To print configuration information, press the Test button
on the front of the OkiLAN 6020e. You can also print
configuration information using the utility program
provided on the CD.
Note: By default, the configuration sheet prints in
ASCII text. If you want the configuration sheet to print
in PostScript or PCL, select this option (if the emulation
is supported in the printer) when you run the network
configuration utility program. The selected language
must match the printer’s configured language to print
correctly.
The content of the configuration sheet will vary depend-
ing on your printer and system setup.
To Next Page
Loading...
