Hardware Installation
I - 7
Section I - Hardware Installation
OKI OkiLAN 6020e User’s Guide
5. Attach the 10/100Base-T UTP cable to the recep-
tacle on the back of the OkiLAN 6020e.
Attach the other end of the cable to the Network.
Powering On the OkiLAN 6020e
Turn printer power on. The red and green indicators on
the OkiLAN 6020e will blink during self-test. When
self-test completes successfully, the red indicator will go
off and the green indicator will stay on.
Green indicator Red indicator
To Next Page
Loading...
