B4400/4500/4550/4600 User’s Guide
44
Maintenance menu
This menu provides access to various printer maintenance
functions.
PCL TRAY 2 ID 1-
5*
-59
Sets the # to specify Tray 2
for the media source
command (ESC & l # H) in
PCL5e emulation.
Displays only when Tray 2
is installed.
PLACE PG CENTER*
LEFT
Sets the paper position.
This is the reference base
used in printing paper
narrower than Edit Size
from the manual feeder
without specifying Paper
Size. The paper’s base
point in LANDSCAPE is not
the point set in the MENU,
rather the lower left
position to which a print
image has been
horizontally shifted.
HEX DUMP EXECUTE Prints in hexadecimal
dump. Turn OFF the power
to end hexadecimal dump
printing.
MAINTENANCE MENU
Item Default Remarks
EEPROM RESET EXECUTE Reset EEPROM.
DRUM COUNT RESET EXECUTE Reset Drum Count.
POWER SAVE ENABLE*
DISABLE
Sets Power Save Mode.
When enabled, time to
change to Power Save
mode is changed in POWER
SAVE DELAY TIME in the
SYS CONF MENU.
SYSTEM ADJUSTMENT MENU
Item Default Remarks
To Next Page
Loading...
Need help?
General
