B4400/4500/4550/4600 User’s Guide
78
Setup tab
setupweight1.jpg
1. Paper size should be the same as the page size of your
document (unless you wish to scale the printout to fit
another size), and should also be the same as the size of
paper you will feed into the printer.
2. You can choose the source of the paper to feed, which
may be Tray 1 (the standard paper tray), Manual Feed,
or Tray 2 (if you have the optional second paper tray
installed). You can also click on the appropriate part of
the screen graphic to select your preferred tray.
3. If you select manual, the Weight selection box becomes
visible. You can leave the setting at Printer Setting or
select as required.
4. A variety of document finishing options can be selected,
such as normal one page per sheet, or N-up (where N
can be 2 or 4) for printing scaled down pages at more
than one page per sheet.
5. If you have changed some printing preferences before
and saved them as a set, you can recall them to avoid
having to set them individually each time you need them.
6. A single on-screen button restores the default settings.
To Next Page
Loading...
Need help?
General
