B4400/4500/4550/4600 User’s Guide
69
Printing envelopes
1. Pull out the rear paper exit tray (1) until it locks and lift
out the paper guide (2).
Fig1_05.jpg
2. Pull down the manual feed tray (3) and adjust the paper
guides to the width of the envelope.
3. Insert the envelope, flap down and to the left, until the
printer grips it.
4. Set envelope size and landscape orientation in your
software, then issue the print command.
Heavyweight paper or cardstock
The normal paper path from a main paper tray to the top
output stack involves two complete U-turns. This may
sometimes cause very heavyweight paper or cardstock to jam
or misfeed.
Use the manual feed (multi-purpose) tray to feed this type of
paper and the rear paper exit to collect printed output. This
gives a nearly straight paper path through the machine and
may prove more reliable in this type of application.
Paper feed, size and media setting
The process used to fuse (fix) the printed image to the paper
involves a mixture of pressure and heat. Too much heat will
cause lightweight paper to crease or curl, and corrugations in
transparencies. Too little heat will cause the image not to fuse
fully into heavyweight paper.
NOTE: Although media properties can be set in the printer
driver for particular jobs, when filling a tray with media it is
1
2
3
To Next Page
Loading...
Need help?
General
