Oki B4400 User Manual

B4400/4500/4550/4600 User’s Guide
61
3. Choose System Environment setting>Networks.
4. Select Views>Network port Setting and make sure
Internal Ethernet is checked.
5. Choose the Views>Internal Ethernet. On the AppleTalk
tab, make sure AppleTalk is checked.
Install the Printer Driver:
1. Insert the supplied CD-ROM in the Macintosh CD-ROM
drive.
2. Open the Driver folder.
3. Double-click Installer for Mac OS X.
4. Input the administrator name and click OK.
5. Follow the onscreen instructions to install.
Add the Printer:
1. On the hard disk select Applications>Utilities folder, and
double-click Printer Setting Utility. (For Mac OS X 10.2 or
earlier, select the Print Center.
2. Click Add (Add the printer, for Mac OS X 10.1.5 or
earlier).
3. Click Other Printers.
4. Select AppleTalk.
5. Select the printer name and click Add.
6. Make sure that the printer name is shown in the Printer
List.
7. Close the Printer Setting Utility.
TCP/IP Protocol
1. Turn on the printer.
2. Start the Macintosh.
3. Choose System Environment>Network.
4. Select Views>Network port Setting and make sure
Internal Ethernet is checked.
5. Select Views>Internal Ethernet on the TCP/IP tab. Input
the IP address, subnet mask, etc. and click Apply now.
NOTE: Select Refer to DHCP Server if IP Address is
automatically obtained from the DHCP server.
Set the IP Address in the printer:

Oki B4400 Specifications

General

Print Technology	LED
First Page Out Time	5 seconds
Processor	200 MHz
Paper Capacity	250 sheets
Connectivity	Parallel, USB
Printer Languages	PCL6, PCL5e, PostScript 3
Maximum Paper Size	A4
Interface	Parallel, USB
Operating Systems Supported	Windows 2000, XP, Vista