C3200n User’s Guide
Paper Recommendations • 16
Multi-Purpose Tray
Use the Multi-Purpose (MP) Tray for printing card stock, labels,
envelopes and transparencies. Or load a stack of letterhead
stationery to switch to as needed.
• A stack of media about 3/8'' (10 mm) high can be loaded
into the MP Tray, equivalent to about 10 envelopes or 50
transparencies.
• Media should be loaded print side up, top edge facing
into the printer.
• Generally, the rear exit (Face Up Stacker) is used with
the MP Tray.
Important!
The duplex unit can be used for paper only, at weights up
to 28 lb. US Bond (105 g/m
2
metric, 58 lb. Index). Do not
use the duplex (two-sided printing) function for labels,
envelopes, transparencies, or paper heavier than 28 lb.
US Bond.
To Next Page
Loading...
Need help?
General
