C3200n User’s Guide
Menus • 65
Print Menu
Notes:
Factory default settings are shown in bold.
Settings with a dagger (†) only appear when the
appropriate option (e.g., Duplex Unit, Second Paper Tray,
etc.) is installed.
Item Settings Explanation
COPIES 1 to 999 Enter the number of copies of a
document to be printed.
PAPER FEED TRAY1
TRAY2†
MP TRAY
Selects the default tray for paper feed.
AUTO TRAY
SWITCH
ON
OFF
If two trays contain identical print
media, the printer can switch to an
alternate tray when the current tray
runs out in the middle of a print job.
TRAY
SEQUENCE
DOWN
UP
PAPER FEED TRAY
Sets the sequence in which the printer
will seek an alternate tray with the
same media size should the currently
selected tray run out of media while
printing a job.
MP TRAY
USAGE
DO NOT USE
WHEN MISMATCHXXX
If a document to be printed demands a
paper size not installed in the selected
tray, the printer can automatically feed
from the Multi-Purpose Tray instead. If
this function is not enabled, the printer
will stop and request that the correct
size be loaded.
MEDIA
CHECK
ENABLE
DISABLE
Set to DISABLE if you do not wish the
printer to check to see if the size paper
loaded in the selected tray matches that
required for the document being
printed.
To Next Page
Loading...
Need help?
General
