C3200n User’s Guide
Menus • 57
Changing Menu Settings _____________
C53_Panel.eps
1. Press + to enter the menu mode.
2. Press +/ – to scan through the available menus until the
menu you wish to enter appears on the display.
3. Press ENTER to enter the menu.
4. Use +/ – to move up and down through the items in the
selected menu. When the item you want to change is
displayed, press ENTER to edit that item.
5. Use +/ – to move up and down through the available
settings for this item.
6. When the setting you wish to use appears on the display,
press ENTER.
An asterisk (*) appears next to the setting, and the
setting flashes.
7. To fi ni sh :
a. If you are through making settings in the menu, press
ON LINE to engage the setting and exit the menu.
b. If you wish to make additional changes in the menu,
press BACK to engage the setting.
–To chage another setting in the same menu, use +/ –
to move through the list of menu items to the one you
wish to change, then follow steps 5 though 7.
–To change the setting for an item in a different menu,
press BACK again, then follow steps 2 through 7.
NOTE
The menus and their various listings vary
depending on which options you have installed
on your printer.
BACK ENTER
OLN INE
CANCEL
MENU
READY
ATTENTION
To Next Page
Loading...
Need help?
General
