Network Configuration> 6
N
ETWORK
C
ONFIGURATION
I
NTRODUCTION
This User’s Guide explains the functionality of your printer’s built
in 100BASE-TX/10BASE-T network interface.
This network interface supports IEEE802.2, IEEE802.3, Ethernet-
II and SNAP, and can detect those frame types automatically.
The network interface also supports TCP/IP protocols.
The Network Interface Panel, for interconnection and producing
self-diagnostic test and configuration printouts, located at the
rear of the printer.
This section details the network interface specification and
several software utilities.
To Next Page
Loading...
Need help?
General
