Oki C332dnw - Page 27

Operator panel > 27
TRAY
CONFIG
(cont.)
MP TRA
Y
CONFIG
(cont.)
MEDIATYPE PLAIN
LETTERHEAD
LABELS
BOND
RECYCLED
CARD STOCK
ROUGH
ENVELOPE
GLOSSY
USERTYPE1
USERTYPE2
USERTYPE3
USERTYPE4
USERTYPE5
Selects the type of media to be fed from the
mu
lti purpose tray so that the printer can
adjust its internal parameters to better
accommodate the selected type of media.
Note: USERTYPEn are displayed only if
regi
stered in t
he host PC/Server.
MEDIAWEIGHT LIGHT
MEDIUM LIGHT
MEDIUM
HEAVY
ULTRA HEAVY1
ULTRA HEAVY2
Selects the media weight to
be fed from the
multi purp
ose tray.
TRAY USAGE WHEN
MI
SMATCHING
DO NOT
USE
If a document to be printed demands a paper
size not installed in the selected tray, the
printer can automatically feed from the multi
purpose tray instead.
If this function is not enabled, the printer will
stop and request the co
rrect size of paper to
be loaded.
TRA
Y1
CONFIG
PAPERSIZE A4
A5
A6
B5
B6
LEGAL14
LEGAL13.5
LEGAL13
LETTER
EXECUTIVE
STATEMENT
8.5“SQ
Folio
16K(184x260mm)
16K(195x270mm)
16K(197x273mm)
CUSTOM
HAGAKI
Selects the size of paper loaded in Tr
ay 1
(upper tr
ay if both trays installed).
For CUSTOM setting
see X DIMENSION and
Y DIMENSION.
X DIMENSION 100 MILLIMETER
~
210 MILLIMETER
~
216 MILLIMETER
Specifies paper width of custom paper as a
defau
lt valu
e.
Sets a paper size at right angles to the paper
run direction.
ITEM SETTINGS EXPLANATION