Oki C332dnw - Wireless (AP Mode) Setting; Boot Menu

Operator panel > 52
W IRELESS (AP M ODE ) S ETTING
If the Wireless LAN Module is fitted.
C332dnw comes with a Wireless LAN Module as standard, but the Wireless LAN Module is
set to Disable by default. To enable the Wireless LAN Module, refer to “Wireless LAN
Module” on page 65.
B OOT M ENU
To enter the boot menu, you should holding on the OK button as the same time as the
power is turned on.
ITEM SETTINGS EXPLANATION
WIRELESS
(AP MODE)
SETTING
WIRELESS (AP MODE) ENABLE
DISABLE
Enables/disables the wireless LAN (AP mode).
AUTOMATIC SETUP
(PUSHBUTTON)
When the OK button is pressed and the Yes/
No confirmation screen is displayed, if Yes is
selected, automatic connection can be
started with a push-button.
MANUAL
SETUP
SSID Displays the SSID.
PASSWORD Displays the password.
CONNEC-
TION
SETTING
SSID Input the SSID.
PASSWORD Input the password.
IPV4 ADDRESS xxx.xxx.xxx.xxx Input the IP address.
ENABLE
DISABLE
Sets whether or not to disclose the AP mode
information to users other than the
administrator.
ENABLE: Disclose user.
DISABLE: Don't disclose user.
AP MODE USER SETTING
ITEM SETTINGS EXPLANATION
ENTER PASSWORD ************ The password to enter BOOT MENU is input.
The password is same as the password to enter
ADMIN SETUP.
WIRELESS MODULE* ENABLE
DISABLE
A wireless LAN module is set as enable/disable.
Even when removing a wireless LAN module after
making it enable, this menu continues enable.
* C332dnw comes with a Wireless LAN Module as
standard, but the Wireless LAN Module is set to
Disable by default. To enable the Wireless LAN
Module, refer to “Wireless LAN Module” on page 65.
SIDM MENU SIDM MANUAL ID# 0
~
2
~
9
Sets the Pn specified by MANUAL in the CSF
control command (ESC EM Pn) of MANUAL-1 ID
No. FX/PPR emulation.
SIDM MANUAL2 ID# 0
~
3
~
9
Sets the Pn specified by MANUAL in the CSF
control command (ESC EM Pn) of MANUAL-2 ID
No. FX/PPR emulation.
SIDM MP TRAY ID# 0
~
4
~
9
Sets the Pn specified by TRAY0 (MP Tray) in the
CSF control command (ESC EM Pn) of MP Tray ID
No. FX/PPR emulation.