Operator panel > 53
SIDM MENU
(cont.)
SIDM TRAY1 ID# 0
1
~
9
Sets the Pn specified by TRAY1 in the CSF control
com
mand (ESC EM Pn) of Tray 1 ID No. FX/PPR
emulation.
SIDM TRAY2 ID#
0
~
5
~
9
Sets the Pn specified by TRAY2 in the CSF control
command (ESC EM Pn) of Tray 2 ID No. FX/PPR
emulation.
(If tray 2 is installed.)
MENU LOCKOUT ENABLE
DISABLE
Sets enable/disable of Menu Locko
ut function.
ENABLE
: It isn't possible to enter the menu mode.
DISABLE: It's possible to enter the menu mode.
PANEL LOCKOUT MODE1
MODE2
OFF
Sets on/off Lockout function
for buttons on the
operator panel.
MODE1: Al
l buttons except for Online, OK,
Cancel and Power save button are locked out.
MODE2: All buttons except for Online and OK
button are locked out.
OFF: All buttons aren't locked out.
MENU
OPERATION
SETUP
UP/DOWN KEY
NORMAL TYPE
OLD TYPE
When choosing Category/Item/Value by the
menu mode, movement of Menu UP/DOWN
button is defined.
NORMAL TYPE:
When a Menu DOWN button is pressed, the
choices move to the next item (the way under the
indication list).
When a Menu UP button is pressed, the choices
move to the previous item (the way on the
indication list).
OLD TYPE:
When a Menu UP button is pressed, the choices
move
to the next item (the way under the
indication list).
When a Menu DOWN button is pressed, the
choices move to the previous item (the way on
the indication list).
ITEM SETTINGS EXPLANATION
To Next Page
Loading...
