Operator panel > 41
PS S
ETUP
COLOR
DENSITY
CYAN DENSITY -3~0~+3 Adjusts the density of each color
(cyan,magenta, yellow and black).
Normal setting is 0.
MAGENTA DENSITY -3~0~+3
YELLOW DENSITY -3~0~+3
BLACK DENSITY -3~0~+3
ADJUST REGSTRATION EXECUTE Performs automatic color registration
adj
ustment.
Normally t
his is done on power on and when
output tray
is opened and then closed.
This process accurately align
s the cyan, magenta
and y
ellow images to the black image.
INK SIMULATION OFF
SWOP
ISO COATED
JAPAN
Selects from a range of industry standard color
swatc
hes.
No
te: This function only applies to PS models
UCR LOW
MEDIUM
HIGH
Selects limitation of the toner layer thickness.
If paper curl occurs in dark prin
ting, selecting
MEDIUM or HIGH sometim
es helps reduce curl.
CMY100% DENSITY ENABLE
DISABLE
When enabled, black areas are produced using
1
00% C, M, and Y instead of black.
Thi
s results in a glossier finish.
CMYK CONVERSION ON
OFF
Setting to OF
F will simpl
ify the conversion
process of CMYK data, which will reduce the
processing time.
This setting is ignored when Ink Simulation
fu
nction is use
d.
Note: This function only applies to PS models
ITEM SETTINGS EXPLANATION
L1 TRAY TYPE1
TYPE2
TYPE1: The tray selection number for the level 1
operator begins with 1.
TYPE2: The number begins with 0.
NET PS-PRO
TOCOL ASCII
RAW
Specifies a communication protocol mode for PS
data from a network.
USB PS-
PROTOCOL ASCII
RAW
Specifies a communication protocol mode for PS
data from
USB.
PDF PA
PER SIZE CURRENT
TRAY S
IZE
SIZE
IN PDF
FILE
SCALING SIZE
Select the paper size of
PDF Direct Print.
PDF SCALING SIZE 1%
~
99%
Specifies scaling size by percent wh
en PDF Paper
Size is set to Scaling Size.
ITEM SETTINGS EXPLANATION
To Next Page
Loading...
