Oki C332dnw - Connecting Via Wireless LAN (Infrastructure Mode)

Installing upgrades > 66
8. Enter the Admin password, and then press the OK button. (The default password is
999999.)
9. Press up or do
wn on the operator panel to
display WIRELESS MODULE.
10. Press the OK button.
11. Press the up button, select ENA
BLE, and press the OK button.
12. Press the ON LINE button.
C ONNECTING VIA WIRELESS LAN (I NFRASTRUCTURE MODE )
To choose a valid default gateway.
1. Press up or down on the operator panel to
display ADMIN SETUP.
2. Press the OK button.
3. Enter the Admi
n password, and then press the OK button.
4. Press up or down on the operator panel to
display NETWORK SETUP, and then
press the OK button.
5. Press up or down on the operator panel to
display ENABLING DEFAULT
GATEWAY, and then press the OK button.
6. Press down on the operator panel to display WIRELESS (INF
RASTRUCTURE),
and then press the OK button.
Connecting Using WPS
If the wireless LAN access point supports WPS, the connection to the wireless LAN can be
made easily by using the easy setup button (WPS button).
Follow the procedure below for the setup.
1. Confirm the posit
ion of the easy setup button and when to press the button by
referring to the user manual of the wireless LAN access point.
2. Confirm that t
he wireless LAN access point has been activated and is functioning
normally.
3. Turn on the printer.
When SETUP WIRELESS? appears,
select YES. Proceed to Step
6.
4.
Press up or down on the operator panel to display WIRELESS(INFRASTRUCTURE)
SETTING
, and then press the OK button.
5. Enter the Admin password, and then press the OK button.
(The default password is 999999.)
6. Press up on the operator panel to
select ENABLE, and then press the OK button.