Oki C332dnw - USB Setup; Print Setup

Operator panel > 37
USB S ETUP
This menu controls the operation of the printer’s USB data interface.
P RINT S ETUP
This menu provides adjustment of various print job related functions.
HUB LINK SETTING AUTO NEGOTIATE
100BASE-TX FULL
100BASE-TX HALF
10BASE-T FULL
10BASE-T HALF
Sets full or half duplex for communication via a network
hu
b.
When AUTO NEGOTIATE is set
, negotiation is done
automatically.
FACTORY DEFAULTS EXECUTE Reloads the settings present when the unit was setup
by the manu
facturer.
ITEM SETTINGS EXPLANATION
USB ENABLE
DISABLE
Sets USB I/F Enable/Disable.
SPEED 480 Mbps
12 Mbps
Selects the USB interface speed.
SOFT RESET ENABLE
DISABLE
Enables or disables the SOFT RESET command.
SERIAL NUMBER ENABLE
DISABLE
Specifies whether to ENABLE or DISABLE a USB
serial
number.
The USB serial number is used to identify the USB
device conne
cted to your PC.
OFFLINE RECEIVE ENABLE
DISABLE
Enables or disables this function. When set to Enable,
t
he in
terface retains a receive possible state even when
switching to Offline. Interface sends the BUSY signal
only when the receive buffer is full or a service call
occurs.
CONNECTED HOST NORMAL
SPECIFIC
ITEM SETTINGS EXPLANATION
PERSONALITY AUTO
EMULATION
PCL
XPS
IBM PPR III XL
EPSON FX
PS3 EMULATION
Selects a printer language.
COPIES 1
~
999
Enter the number of copies of a docu
ment to be
printed from 1 to 999.
DU
PLEX ON
OFF
Switches the Duplex (2 sided) function ON/OFF.
ITEM SETTINGS EXPLANATION