Installing upgrades > 64
S
ETTING
THE
DRIVER
DEVICE
OPTIONS
Once your new upgrade has been installed, you may need to update the printer driver so
that the additional features are available to your applications.
Accessories such as additional paper trays will only be usable
if the printer driver on your
computer knows they are there.
In some cases the hardware configuration of your machine is automatically dete
cted when
the driver is installed. However, it is advisable to at least check whether all of the available
hardware features are listed in the driver.
This procedure is essential if you subsequently add extra hardware feat
ures to your
machine after the drivers have been installed and set up.
Remember that if your machine is shared between users on different computers, the driver
must be adjust
ed on each user’s machine.
Windows
1. Access the driver’s Properties window.
(a) Open the Device and Printers window via the Start Menu or from the Windows
Control P
anel.
(b) Right-click the icon for this machine, and choose Printer Properties from t
he
pop-up menu.
2. Select the Device Options tab.
In the Wi
ndows PostScript driver the tab may be called Device Set
tings.
3. Set the options for any devices you have just installed.
4. Click OK to clos
e the window and save your changes.
Mac OS X
1. Select System Preference from the Apple Menu. Open the Mac OS X Printers &
Scanners Preferences.
2. Ensure your machine is selected.
3. Click
Options & Supplies.
4. Click Options.
5. Sel
ect all hardware options appropriate to your machine and click OK.
NOTE
Applies to the PS driver only.
To Next Page
Loading...
