Installing upgrades > 65
W
IRELESS
LAN M
ODULE
P
RECATIONS
WHEN
USING
WIRELESS
LAN
C332dnw comes with a wireless LAN module as standard, but the wireless LAN module is
set to Disable by default. Please follow the procedure from Step 6 to enable the wireless
LAN module.
Carefully read the following precautions before using the machine in a wireless LAN
environment.
•
In a wireless LAN environment, the machine enters sleep mode, but
does not enter deep
sleep mode.
• Do not place any devices (especially microwave ovens or digital cordless
telephones) that
emit weak electromagnetic waves near the machine.
• Install the machine near a wireless LAN access point or wireless device wit
h no obstacles
between them (the distance should be within 30m).
• Wireless connections may be difficult if there is any me
tal, aluminum framed windows, or
reinforced concrete walls between the machine and the wireless LAN access point.
• Wireless LAN connections may have slower transmission speeds, depending on the
environment,
than wired LAN or USB connections. We recommend using a wired LAN or
a USB connection to print large amounts of data, such as photographs.
1. Switch off the printer.
2. Open the Wireless LAN I/
F Cover.
3. Connect the connector of the connection cabl
e to the Wireless LAN module.
4. Install the module to the printer.
5. Close the Wireless LAN I/F Cover.
6. Press and hold the OK
button on the ope
rator panel while turning on the printer, and
release it once BOOT MENU appears on the display panel.
7. Press the OK button.
To Next Page
Loading...
