Operator panel > 44
IBM PPR S
ETUP
ITEM SETTINGS EXPLANATION
CHARACTER PITCH 10 CPI
12 CPI
17 CPI
20 CPI
PROPORTIONAL
Specifies character pitch i
n IBM PPR emulation.
FONT CONDENSE
12CPI TO 20CPI
12CPI TO 12CPI
Specifies 12CPI pitch for Condense Mode.
CHARACTER SET SET-2
SET-1
Specifies a character set.
SYMBOL SET IBM-437
(Default Symbol
S
et only shown)
Spec
ifies a symbol set.
LETTER O STYLE ENABLE
DISABLE
Specifies the style that replaces 9BH with letter o
and 9DH
with a ze
ro.
ZERO CHARACTER NORMAL
SLASHED
Sets the zero to be slashed or unslashed.
LINE PITCH 6 LPI
8 LPI
Specifies the line spacing.
WHITE PAGE SKIP ON
OFF
Selects whether blank pages are printed or not.
CR FUNCTION CR
CR+LF
Selects whether a received ca
rriage return
character (0
Dh) also causes a line feed.
LF FUNCTION LF
LF+CR
Sets performance when LF code
is received.
LINE
LENGTH 80 COLUMN
136 COLUMN
Specifies the number of characters per line.
FORM LENG
TH 11 INCH
11.7 INCH
12 INCH
Specifies the length of paper.
Note: The default setting varies depending
on the
sales area.
TOF POSITION 0.0 INCH
0.1 INCH
~
1.0 INCH
Specifies the distance of prin
t from the top edge
of the paper
.
LEFT MARGIN 0.0 INCH
0.1 INCH
~
1.0 INCH
Specifies the distance of print from the left hand
edge of the paper
.
FIT TO LETTER ENAB
LE
DISABLE
Sets the printing mode that can fit print data,
equivale
nt to 11 inches (66 lines), in the LETTER-
size printable area.
Note: The default setting v
aries depending
on the
sales area.
TEXT HEIGHT SAME
DIFF
Sets the height of a character.
SAME: R
egardless of CPI, same height.
DIFF: As CPI, chara
cter heights v
ary.
To Next Page
Loading...
