C3600n User’s Guide
16
Multi Purpose Tray
The Multi Purpose Tray can handle the same sizes as the
Cassette Tray but in weights up to 54 lb. (203 g/m²). For very
heavy paper stock, always use the face up (rear) paper
stacker. This ensures that the paper path through the printer
is almost straight.
The Multi Purpose Tray can feed paper widths as small as
3.94 in (100 mm) and lengths up to 47.24 in. (1200 mm)
[banner printing].
For paper lengths exceeding Legal 14 in. (356 mm) use paper
stock between 24 and 34 lb. (90 g/m² and 128 g/m²) and the
face up (rear) paper stacker.
When using the Multi Purpose Tray, each sheet of paper can
only be fed one at a time.
Watermarked or Headed paper should be loaded print side up
and top edge into the printer.
To Next Page
Loading...
