C3600n User’s Guide
67
PCL Emulation menu
This menu controls the settings that are in effect when the
printer is operating in PCL emulation mode.
PCL EMULATION MENU
ITEM SETTINGS EXPLANATION
FONT SOURCE RESIDENT /
RESIDENT2
DOWNLOADED
Specifies the location of the PCL
default font. Normally this will be
INTERNAL unless additional fonts
are installed in the expansion ROM
slot or additional fonts have been
downloaded to RAM as permanent
fonts.
FONT No. I0 / C001 /
S001
Sets the current default font number
from the currently selected source,
which could be internal (I), ROM slot
(C) or downloaded (S).
FONT PITCH 0.44CPI~
10.00CPI~
99.99CPI
Sets the width of the PCL default
font in characters/inch (CPI).
Default font is the fixed-pitch,
scalable font. The value is displayed
to the second decimal place
Displayed only when the font
selected in Font No. is fixed-spacing,
scalable font.
SYMBOL SET PC-8
(Default Symbol
Set only shown)
PCL symbol set. If the font source
and number are changed to one
which does not support the selected
symbol set, this must be changed to
an available symbol set for that font.
A4 PRINT
WIDTH
78 COLUMN
80 COLUMN
Sets the number of columns subject
to Auto LF with A4 paper in PCL.
This is the value when Auto CR/LF
Mode is set to OFF with the 10CPI
character.
WHITE PAGE
SKIP
OFF
ON
Selects whether blank pages are
printed or not.
CR FUNCTION
(Carriage
Return)
CR
CR+LF
Selects whether a received carriage
return character (0Dh) also causes a
line feed.
LF FUNCTION
(Line Feed)
LF
LF+CR
Selects whether a received line feed
character (0Ah) also causes a
carriage return.
PRINT MARGIN NORMAL
1/5 INCH
1/6 INCH
Sets the non-printable page area.
NORMAL is PCL-compatible.
To Next Page
Loading...
Need help?
General
