C3600n User’s Guide
65
System configuration menu
This menu adjusts general printer settings to suit the way you
prefer to work.
SYSTEM CONFIGURATION MENU
ITEMS SETTINGS EXPLANATION
TIME TO POWER
SAVE MODE
5 MIN
15 MIN
30 MIN
60 MIN
240 MIN
Adjusts the idling time before the
printer automatically switches into
power saving mode. In this mode
power consumption is reduced to a
low level required to just keep the
printer operating and ready to
receive data. When a job is sent the
printer will require a warm-up time
of up to 1 minute before printing can
begin.
CLRABLE
WARNING
(CLEAR
ALARMS)
ONLINE
JOB
When ON LINE, non-critical
warnings, such as requests for a
different paper size, can be cleared
by pressing the ON LINE button.
When set to JOB, they are cleared
when the print job resumes.
MANUAL FEED
(Multi Purpose
Tray) TIMEO U T
OFF
30~60~120~
200~30
seconds
Specifies how many seconds the
printer will wait for paper to be fed
in manual feed mode before
cancelling the job.
WAIT TIMEOUT OFF
5~10~20~30~
40~300
seconds
Specifies how many seconds the
printer will wait when received data
pauses before forcing a page eject.
In Postscript Emulation mode the job
will be cancelled if timeout occurs.
AUTO
CONTINUE
OFF
ON
Determines whether or not the
printer will automatically recover
from a memory overflow error.
NET PS
PROTOCOL
RAW
ASCII
Selects PostScript data format for
the network port.
USB PS
PROTOCOL
RAW
ASCII
Selects PostScript data format for
the USB port.
LOW TONER
(PRINT
CONTINUATION
AT TONER
SHORTAGE)
CONTINUE
STOP
Specifies whether the printer should
continue printing even after a low
toner condition is detected.
To Next Page
Loading...
Need help?
General
