Oki C3600n User Manual

C3600n User’s Guide
73
IP ADDRESS xxx.xxx.xxx.xxx Current assigned IP address. To
change, press ENTER and use +/–
keys to increment 1st octet, then
press ENTER again to move on to
next octet. When 4th octet has been
set, press ENTER again to register
new address.
SUBNET MASK xxx.xxx.xxx.xxx Current assigned subnet mask. To
change, proceed as above.
GATEWAY
ADDRESS
xxx.xxx.xxx.xxx Current assigned gateway address.
To change, proceed as above.
WEB ENABLE
DISABLE
Enables or disables Web
configuration facility.
TELNET ENABLE
DISABLE
Enables or disables Telnet
configuration facility.
FTP ENABLE
DISABLE
Enables or disables communication
via FTP (File Transfer Protocol).
SNMP ENABLE
DISABLE
Enables or disables SNMP protocol
(Simple Network Management
Protocol).
NETWORK
SCALE
NORMAL
SMALL
Selects network size.
When NORMAL is selected, printer
can work effectively, even when
connected to a HUB that has a
spanning tree feature. However,
printer start up time gets longer
when computers are connected with
two or three small LANs.
When SMALL is selected, computers
can cover from two or three small
LANs to a large LAN, but may not
work effectively when connected to
a HUB that has a spanning tree
feature.
HUB LINK
SETTING
AUTO
NEGOTIATE
100BASE-TX
FULL
100BASE-TX
HALF
10BASE-T FULL
10BASE-T HALF
Sets full or half duplex for
communication via a network hub.
When AUTO is set, negotiation is
done automatically.
NETWORK MENU
ITEM SETTINGS EXPLANATION

Oki C3600n Specifications

General

Brand	Oki
Model	C3600n
Category	Printer
Language	English