44205401TH Rev.1
190 /
Oki Data CONFIDENTIAL
7. Troubleshooting and repair procedure
7.5.4.1.1 Is the certificate created?
Log-on in as the administrator, and select "Security" "Encryption (SSL/TLS)".
If the following screen is displayed, certificate of the printer is not created yet. (The same
screen is displayed when failed to create certificate.)
Solution: Create certificate by referring to the User’s Manual (Advanced edition).
7.5.4.1.2 Is the SSL/TLS setting set to [ON]?
Log-on in as the administrator, and select "Security" "Encryption (SSL/TLS)".
If the following screen is displayed, certificate has already been created, but the SSL/TLS
setting is turned [OFF].
Before creating certificate (default state)
Solution : Set the SSL/TLS setting to [ON].
To Next Page
Loading...
