44205401TH Rev.1
47 /
Oki Data CONFIDENTIAL
3. Set up
(1)-5. Set the number of tray by the printer driver.
The printer driver setup for recognizing the option tray unit is required.
If the printer driver is not set up, please set up the printer driver completely referring to
the user's manual (Setup) firstly, and then finish the following setting procedure.
Note! The authority of the computer administrator is required.
For windows PS printer driver
(For Windows XP)
For Windows Vista, click on [start] =>
[control panel] => [printer].
Fo
r Windows XP, click on [start] =>
[control panel] => [printer and other
hardware] => [printers and Faxes].
Fo
r WindowsServer 2003, click on
[start] => [printers and faxes].
For
Windows 2000, click on [start] =>
[Settings] => [printers].
Click the [C711(PS)] icon with right-
click button on your mouse and
choose the [Properties].
Choose [get information from printer]
from [installable options] in [Device
options] tab, and click [setup] or [get
information from printer]. For USB
connection, set [Optional paper
source] manually.
Click [OK].
(1)-3. Connect the power cord and printer cable to the printer and turn the
power on.
Note! If the message [Service Call/182: Fatal Error] or [Service Call/183: Fatal
Error] is displayed, reinstall the optional tray unit.
(1)-4. Print the setting content and confirm if the option tray unit is installed
properly.
Print the setting content with following the procedure in chapter 3.6.
Confirm the content of [tray 2] or [tray 3] is display in header part.
Note! If the content of [tray 2] or [tray 3] is not displayed, reinstall the second tray
unit.
To Next Page
Loading...
Need help?
General
