44205401TH Rev.1
48 /
Oki Data CONFIDENTIAL
3. Set up
For Windows PCL printer driver
For Windows Vista, click on [start] =>
[control panel] => [printer].
Fo
r Windows XP, click on [start] =>
[control panel] => [printer and other
hardware] => [printers and Faxes].
Fo
r WindowsServer 2003, click on
[start] => [printers and faxes].
For
Windows 2000, click on [start] =>
[Settings] => [printers].
Click [C711(**)] (** is PCL or PCL
XPS (printer driver type)) icon with
right-click button on your mouse and
choose [Properties].
Choose [get information from printer]
in [Device options] tab. For USB
connection, input the optional tray
number in [Optional devices] manually.
Click [OK].
For Mac OS X
When the optional device has been added into in Mac OS X before installing the
printer driver, the device information is gotten automatically. However, if the printer is
connected by [IP print] and [Bonjour (Rendezvous)], the device information could not
be gotten automatically.
If the printer is connected by [AppleTalk], the device information could also not be
gotten automatically when the optional device has been added into in Mac OS X
before installing the printer driver.
Please finish the following setting procedure for above.
Double-click [Applications] for hard
disk => [utility] => [print setting utility]
([Applications] => [Utility] => [print
center] in Mac OS X)
Select [C711], click [Show info] and
open [printer info].
Choose [installable options].
Select the [Optional paper source],
and click [Apply].
Close [printer info].
(For Windows XP)
To Next Page
Loading...
Need help?
General
