Oki C711 User Manual

44205401TH Rev.1
49 /
Oki Data CONFIDENTIAL
3. Set up
(2) Installation of Duplex unit
This unit is used for printing on two sides of paper.
Note! For two-sides printing, it is recommended to add expansion memory. For
details, see "Expansion memor
ies."
(2)-1. Turning OFF the printer power and disconnecting the power cord
Note! If an expansion memory is installed with the power switched ON, the printer
may be broken.
(2)-2. Peeling the protective tapes off the Duplex unit
(2)-3. Install Duplex Unit
Insert the Duplex unit into the lower part on the back of the printer as far as
it will go.
Ensure that the claw on either side of the Duplex unit is securely
accommodated in the hole of the printer.
O I
Protective tapes (2)
Holes
Claws
Duplex unit

Oki C711 Specifications

General

Print Technology	LED
Connectivity	USB, Ethernet
Memory	256 MB (max 768 MB)
Printer Type	Workgroup Printer
Media Sizes	A4, A5, B5, Legal, Letter, Executive
Operating System Compatibility	Windows, Linux, Mac OS
Resolution	1200 x 600 dpi