44205401TH Rev.1
52 /
Oki Data CONFIDENTIAL
3. Set up
(3)-5. Install the side cover.
(3)-6. Connect the power cord and printer cable to the printer, and turn the
power on.
Note! If the message [Service Call/031:Fatal Error] is displayed, please reinstall
the memory.
(3)-7. Print the setting content and confirm if the optional memory is installed
properly.
Screw
Top cover
Front cover
Side cover
Install the side cover.
Fix the side cover with the screw. (one
place)
Close the top cover and front cover.
Print the setting content with following the procedure in chapter 3.6.
Confirm the total memory capacity displayed in [Total Memory] of [System]
part.
Note! If total memory capacity displayed in [Total Memory] is incorrect,
please reinstall the memory
.
(4) Install the SD memory card.
Note! Be careful that the font cannot be downloaded.
(4)-1.Turn the power of printer off, and pull out the power cord.
Please turn off the power with following the procedure in chapter 3.5.2 [Turn off
power].
Notes! • If
you turn off the power without properly shutting down, it may cause
damage to the printer. Please operate the [Shutdown Menu].
• It
may cause damage to the printer, if you install the optional memory
with power ON.
To Next Page
Loading...
Need help?
General
