44205401TH Rev.1
54 /
Oki Data CONFIDENTIAL
3. Set up
Press the SD memory card until it clicks.
(4)-6. Connect the power cord and printer cable to the printer, and turn the
power on.
Screw
Top cover
Front cover
Side cover
Install the side cover.
Fix the side cover with the screw.
(one place)
Close the top cover and front cover.
(4)-5. Install the side cover.
Print the setting content with following the procedure in chapter 3.6.
Confirm the SD Memory Card capacity displayed in [SD Card].
Memo The capacity of
SD memory card might be different from the example of
the above figure.
Note! Please
reinstall the
SD memory card when the capacity of SD Card is
not displayed.
And, the printer driver setup for recognizing the SD memory card disk is required.
If the printer driver is not set up, please set up the printer driver completely referring to
the user's manual (Setup) firstly, and then finish the following setting procedure.
(4)-7. Print the setting content and confirm if the SD memory card is installed
properly.
To Next Page
Loading...
Need help?
General
